If you need to replace or repair a windshield, you will have several options. Some may be better than others, and it can be overwhelming deciding what to do. Leaving a cracked or chipped windshield untouched will end up causing more damage to the glass in the long run. It's best to have this fixed sooner rather than later. Here are some options to consider.

If you do decide that windshield replacement is your best bet, you have a few choices. First of all, make sure you check to see if your insurance covers it. In a lot of instances it does. The problem is that many policies have a deductible that is higher than the cost of the replacement or front window repair job. If that is the case, you will have to pay for it yourself.



Once the door panel is removed, the problem may be quite obvious, as it was in my case. Your door may have a vapor barrier or plastic sheet that is glued to the door. Carefully remove this. In most cases, you can reuse the adhesive for the barrier during re-assembly. Make sure the motor is connected. Look for burned wires or obvious damage. If everything is intact, you need to test the motor. The best way to do this is to run a jumper wire from the positive terminal of your battery to the positive side of the motor to see if it jumps to life. If not, the motor needs to be replaced.

Here windshield replacement again notice I said sold and not what price houses are being listed". Listing prices are usually the initial pricing of sentimental home owners who think their house is worth that price. In today's market, seldom is a house sold for the original listed price. Realtors have a constant struggle with many home owners concerning a realistic listing price. So don't get caught up in what other houses are listed at. Be concerned with what price similar houses have recently sold for.

If you don't windshield chip repair hear anything at all there may be a loose corroded or broken wire somewhere in the circuit. Start at the fuse box and trace the wire to the window switch. You can do this with a voltmeter or a 12 volt test light. If you have 12 volts going into the switch, but no voltage coming out of the switch when you press the button, the switch is probably faulty. If 12 volts is coming out of the switch, then the problem is either in the wiring from the switch to the window motor or the motor itself.

The syringe cover is to be removed now and the syringe should be pressed with the repair compound into the support rod. Keep twisting till the syringe is in its position.

With these 4 questions answered, it can be much easier to choose windshield chip repair over the other alternatives. However, if you still have questions about your specific situation, it is always best to contact your local mobile windshield chip repair service. They will have all of the answers you need in order to make the best decision possible, for your specific situation.